Other
Iso-Octyltriethoxysilane
Iso-Octyltriethoxysilane CAS:35435-21-3 95%min
The EquivalentProducts to other Manufacturers
TypicalPhysical Properties
Applications
Commercialbuildings
Parkingdecks/garages
Highways
Bridgestructures
Fillermodification
Description
Iso-Octyltriethoxysilaneis high purity, undiluted Noctyltriethoxy-silane. Whendiluted with anappropriate solvent, it can be used in the formulation of water repellentproducts. Upon proper application, the formulated product will penetrate andprovide water repellency by chemically reacting with the cementitioussubstrate. Treated substrates are hydro-phobic and retain their originalappearance.
Iso-Octyltriethoxysilanecan also be used to improve the compatibility of mineral fillers or pigments inpolyolefins or to ease their dispersion in nonpolar matrices.
Iso-Octyltriethoxysilaneis a small molecule to allow for deep penetration into the cementitioussurface. This material reacts with moisture in the air and n the substrate inthe presence of an alkaline or acidic environment to produce hydroxy groups.These hydroxy groups will bond with the substrate and tself to produce ahydrophobic treatment that inhibits water absorption into the substrate. Analkaline environment, such as new concrete, will catalyze the reaction and speedthe formation of the hydrophobic surface.
HOW TO USE
Dilution
Iso-Octyltriethoxysilanecan be diluted in solvents such as alcohols, chlorinated solvents, aliphaticsolvents and low molecular weight cyclic polydimethylsiloxane such asCyclotetrasiloxane before use. Typical dilution levels are 40 percent and 20percent Iso-Octyltriethoxysilane in a solvent.
Blends of thesolvents can also be used. The evaporation rate of the diluted material can bemodified depending on the type and concen-tration of the solvent. Select theproper solvent for your application, as some silane/solvent blends may darkenthe surface. Refer to the manufacturer ’ s data sheet for proper handling anddisposal of solvents.
Application
Methods ofapplication include airless sprayer, roller and brush. When a brush or rolleris used, repeated applications should be made until the surface remains moistfor a few minutes. If an airless sprayer is used, application should continueuntil the substrate is thoroughly saturated. Sprayers should be fitted withsolvent resistant hoses and gaskets.
A testapplication is necessary on each surface to be treated to ensure compatibilityand the desired water repellent result. Surfaces should be free of standingwater, surface dirt,dust, oils and other contaminants.
Formulated Iso-Octyltriethoxysilanemay be applied to damp surfaces although dry surfaces are preferred to achievemaximum penetration into the substrate.
Packing
210LIron Drum: 180kg/drum
1000LIBC container: 880kg/container
Our company is rich in the commercial manufacturing experience like ISOOCTYLTRIETHOXYSILANE isooctyltriethoxysilaen etc from the research, R&D, pilot and production, establishing the close partnership with leading pharmaceutical manufacturers at home and abroad and being noticeably competitive in Silane,triethoxy(2,2,4-trimethylpentyl) Triethoxy(2,4,4-trimethylpentyl)silane timing, quality and pricing. Our company has set up four Triethoxy(2,4,4-trimethylpentyl)silane Silane,triethoxy(2,2,4-trimethylpentyl) production bases in Heze and Liaocheng in Shandong, Yibin in Sichuan and Yueyang in Hunan. All kinds of production facilities are offered and conform to the SOP and GMP management standards for the domestic and overseas customers.
Our company is engaged in the production and custom synthesis of intermediates such as APIs and special chemicals. Relying on our own strong R&D capabilities, we accept custom synthesis of advanced pharmaceutical intermediates, as well as custom synthesis of other types of advanced chemicals, with mature R&D systems and production capacities from gram to tonnage,Custom synthesis and production of isoxazole products,Founded in 2007, our company is a high-tech pharmaceutical and pesticide chemical company integrating R&D, production and sales,Our company provides custom synthesis and production of pyridine products
If you are looking for Iso-Octyltriethoxysilane Triethoxy(2,4,4-trimethylpentyl)silane manufacturer,Silane,triethoxy(2,2,4-trimethylpentyl) factory or Silane,triethoxy(2,2,4-trimethylpentyl) supplier, and get Triethoxy(2,4,4-trimethylpentyl)silane price information, please contact us to get isooctyltriethoxysilaen COA (Certificate of Analysis,MSDS(Material safety data)
The EquivalentProducts to other Manufacturers
| GE | Dowcorning | ShinEtsu | Degussa | Chisso |
| N.A | N.A | N.A | N.A | N.A |
| Chemical Name | Iso-Octyltriethoxysilane |
| CAS No. | 35435-21-3 |
| EINECS No. | 252-558-1 |
| Formula | C4H32O3Si |
| Appearance | Colorless transparent liquid |
| Density(ρ20, g/cm3) | 0.8790±0.0050 |
| Purity | 95% |
Commercialbuildings
Parkingdecks/garages
Highways
Bridgestructures
Fillermodification
Description
Iso-Octyltriethoxysilaneis high purity, undiluted Noctyltriethoxy-silane. Whendiluted with anappropriate solvent, it can be used in the formulation of water repellentproducts. Upon proper application, the formulated product will penetrate andprovide water repellency by chemically reacting with the cementitioussubstrate. Treated substrates are hydro-phobic and retain their originalappearance.
Iso-Octyltriethoxysilanecan also be used to improve the compatibility of mineral fillers or pigments inpolyolefins or to ease their dispersion in nonpolar matrices.
Iso-Octyltriethoxysilaneis a small molecule to allow for deep penetration into the cementitioussurface. This material reacts with moisture in the air and n the substrate inthe presence of an alkaline or acidic environment to produce hydroxy groups.These hydroxy groups will bond with the substrate and tself to produce ahydrophobic treatment that inhibits water absorption into the substrate. Analkaline environment, such as new concrete, will catalyze the reaction and speedthe formation of the hydrophobic surface.
HOW TO USE
Dilution
Iso-Octyltriethoxysilanecan be diluted in solvents such as alcohols, chlorinated solvents, aliphaticsolvents and low molecular weight cyclic polydimethylsiloxane such asCyclotetrasiloxane before use. Typical dilution levels are 40 percent and 20percent Iso-Octyltriethoxysilane in a solvent.
Blends of thesolvents can also be used. The evaporation rate of the diluted material can bemodified depending on the type and concen-tration of the solvent. Select theproper solvent for your application, as some silane/solvent blends may darkenthe surface. Refer to the manufacturer ’ s data sheet for proper handling anddisposal of solvents.
Application
Methods ofapplication include airless sprayer, roller and brush. When a brush or rolleris used, repeated applications should be made until the surface remains moistfor a few minutes. If an airless sprayer is used, application should continueuntil the substrate is thoroughly saturated. Sprayers should be fitted withsolvent resistant hoses and gaskets.
A testapplication is necessary on each surface to be treated to ensure compatibilityand the desired water repellent result. Surfaces should be free of standingwater, surface dirt,dust, oils and other contaminants.
Formulated Iso-Octyltriethoxysilanemay be applied to damp surfaces although dry surfaces are preferred to achievemaximum penetration into the substrate.
Packing
210LIron Drum: 180kg/drum
1000LIBC container: 880kg/container
Our company is rich in the commercial manufacturing experience like ISOOCTYLTRIETHOXYSILANE isooctyltriethoxysilaen etc from the research, R&D, pilot and production, establishing the close partnership with leading pharmaceutical manufacturers at home and abroad and being noticeably competitive in Silane,triethoxy(2,2,4-trimethylpentyl) Triethoxy(2,4,4-trimethylpentyl)silane timing, quality and pricing. Our company has set up four Triethoxy(2,4,4-trimethylpentyl)silane Silane,triethoxy(2,2,4-trimethylpentyl) production bases in Heze and Liaocheng in Shandong, Yibin in Sichuan and Yueyang in Hunan. All kinds of production facilities are offered and conform to the SOP and GMP management standards for the domestic and overseas customers.
Our company is engaged in the production and custom synthesis of intermediates such as APIs and special chemicals. Relying on our own strong R&D capabilities, we accept custom synthesis of advanced pharmaceutical intermediates, as well as custom synthesis of other types of advanced chemicals, with mature R&D systems and production capacities from gram to tonnage,Custom synthesis and production of isoxazole products,Founded in 2007, our company is a high-tech pharmaceutical and pesticide chemical company integrating R&D, production and sales,Our company provides custom synthesis and production of pyridine products
If you are looking for Iso-Octyltriethoxysilane Triethoxy(2,4,4-trimethylpentyl)silane manufacturer,Silane,triethoxy(2,2,4-trimethylpentyl) factory or Silane,triethoxy(2,2,4-trimethylpentyl) supplier, and get Triethoxy(2,4,4-trimethylpentyl)silane price information, please contact us to get isooctyltriethoxysilaen COA (Certificate of Analysis,MSDS(Material safety data)
Related Products: